Nobody likes the gas vapors in the cockpit lockers, so I decided to upgrade our portable gas tank and add the overboard ventilation. I did not let the boatyard install that standard big locker ventilation grilles, because in heavy rain, the drops can easily jump through the grille into the locker. More holes means more problems with water :-)
I don't have any issues with the humidity or mold in the lockers, because the locker is not air tight anyway.
Because I have a portable gas tank, I wanted to make it simple for manipulation, so all the hose connections are made using the click-on connectors (Chrysler type).
 |
| Overboard vented Thru-hull |
 |
| Transparent PVC, oil resistant ventilation hose |
 |
The hose is going straight upwards to prevent gas collection when the boat is heeled
(Its not visible, but the hose is attached via the self-adhesive tie downs) |
 |
| Ventilation cap on the tank is closed and the tank can breathe all the time |
|
|
 |
| Fuel hose and the outboard 12V connector (UCHEN 50Amps) |
There is also one positive point of this conversion, that during anchorage, I always closed the vent cap on the tank to prevent gas vapors, but a built up gas pressure had a negative influence on the outboard carburetor. Simply pushing the gas into the outboard if not able to escape naturally and sometimes had a problem while starting. Not speaking of the fuel spills when I tried to disconnect the fuel hose from the outboard.
One more enhancement finished - more to come.
